JNC-1814ZL-Gantry Machining Center-Three Linear Guideways

JNC-1814ZL Technical Parameters (Fanuc 5 packsControl System +Direct connectionBT40 spindle)

Technical Parameters

Model	model	Unit)
Itinerary Travel
X-axis travel	X-axis travel	mm	1800
Y-axis travel	Y-axis travel	mm	1400
Z-axis travel	Z-axis travel	mm	550
Gantry width (inside)	Gantry width （inside)	mm	1400
Distance from spindle end face to work table	Distance from guide plane to spindle center	mm	100-650
Workbench Worktable
Table size	Worktable size (L×W)	mm	1800×1200
Maximum load-bearing	Maximum load	kg	2000
T-slot	T-slot	mm	7-18-180
Spindle Spindle
Spindle speed	Spindle Speed	.rpm	150-12000
Spindle power	Spindle motor power	KW	11
Spindle taper hole	Spindle taper hole		BT40-φ150
Spindle spring chuck	Spindle collet chuck		C32
Loose knife way	Unlock tool way		Hydraulic
Federate
X/Y/Z express displacement	Ted X/Y/Z axis express displacement	mm/min	12000
Cutting feed rate	Cutting feed rate	mm/min	8000
Accuracy
Positioning accuracy	Pointing accuracy	mm	±0.005/300
Repeatable positioning accuracy	Repeat ability accuracy	mm	±0.003/300
Machine information
Machine tool dimensions	Machine dimension (L×W×H)	mm	510035003500
Machine weight	Machine weight	kg	14480
Power demand (power/current)	Power requirement	KVA	24

※As the company is constantly improving its products，Therefore, the company reserves the right to change the design and specifications and configuration at any time without notice，

If patronized，Please check if the specifications have changed!

JNC-1814ZL（Fanuc 5 packsControl System +Direct connectionBT40 spindle)Optional configuration of the model (charged)

serial number	Accessory name	Product model	quantity	Remarks
1	̈BT40 tool magazine should be selected	Robotic arm BT40-24T	1cover
2	̈ Optional four-axis (body)	Body HR320，Drive + motor	1cover
3	̈ Optional four-axis (body + disc tailstock)	Body HR320，Drive + motor，Disc tailstock RTH320，Block L，Bridge plate	1cover
4	̈ Optional four-axle (body + top tailstock)	Body HR320，Drive + motor，TJ320 Tailstock，Chuck flange	1cover
5	̈ Flat nose pliers should be optional	6inch	1piece
6	̈Handheld refractometer should be optional	0-60	1piece
7	̈ Optional lock knife wrench	C32 special wrench	1handful
8	̈ Optional locking tool holder	BT40(With card slot)	1piece
9	̈Precision cutting head is optional	BT40-C32-105mm	1piece
10	̈ Precision spring clip is optional	C32 4/6/8/10/12/16	1 each
11	̈ To choose a combination pressure plate	M16 Composite Platen	1cover
12	̈ To be equipped with an inner six wrench		1cover
13	̈ To choose ten、Slotted screwdriver		1 handful each