MF2015P - Gantry machining center - beam type - three linear guideways

MF2015P (Mitsubishi M80B + BT40 spindle)Technical parametersTechnical Parameters

Model	model	Unit)
itineraryTravel
X-axis travel	X-axis travel	mm	2500
Y-axis travel	Y-axis travel	mm	1700
Z-axis travel	Z-axis travel	mm	800
Distance from spindle end face to work table	Distance from guide plane to spindle center	mm	270-1070
The middle distance between the inside of the two columns	Gantry width （inside)	mm	1500
The distance from the work surface to the beam	Distance from table top to beam	mm	1100
workbenchWorktable
Table size	Worktable size	mm	2700X1400
T-slot	Maximum load	mm	7-22-200
Maximum load-bearing	Maximum load	kg	8000
spindleSpindle
Spindle speed	Spindle Speed	.rpm	12000
Spindle power	Spindle motor power	KW	11Kw
Spindle taper hole	Spindle taper hole		BT40-φ150
Spindle spring chuck	Spindle collet chuck		C32
Loose knife way	Unlock tool way		Pneumatic booster cylinder knife
Feed rateFederate
X/Y/Z express displacement	Ted X/Y/Z axis express displacement	mm/min	12000
Cutting feed rate	Cutting feed rate	mm/min	8000
precisionAccuracy
Positioning accuracy	Pointing accuracy	mm	±0.005/300
Repeatable positioning accuracy	Repeat ability accuracy	mm	±0.003/300
Machine informationMachine information
Machine tool dimensions	Machine dimension (L×W×H)	mm	700043004200
Machine weight	Machine weight	kg	20000
Power demand (power/current)	Power requirement	KVA	35

※As the company is constantly improving its products，Therefore, the company reserves the right to change the design and specifications and configuration at any time without notice，

If patronized，Please check if the specifications have changed!

MF2015P (Mitsubishi M80B + BT40 spindle)Model optional configuration (Additional charges apply）

sequencenumber	Accessory name	Product model	quantity	Remarks
1	̈Tool magazine should be selected	BT40-24T cutter arm type	1cover	Tokusho / Okada / Furuta
2	̈ 150 electric spindle should be optional	150	1cover
3	̈ 170 motor spindle should be optional	170	1cover
4	̈ 210 motor spindle is optional	210	1cover
5	̈ Manual 90 angle head is optional	BT40-90	1cover
6	̈ Flat nose pliers should be optional	6inch	1piece
7	̈ An optional refractometer is required	Handheld 0-60	1piece
8	̈ Optional lock knife wrench	C42 exclusive	1handful
9	̈ Optional locking tool holder	BT50 with clamping lock tool holder	1piece
10	̈Precision cutting head is optional	BT50-C42-110(With card slot)	1piece
11	̈ Precision spring clip is optional	C42 6/8/10/12/16/20	1 each
12	̈ To choose a U disk		1piece
13	̈ To choose a combination pressure plate	M16 Composite Platen	1cover