T1170W high-speed five-axis drilling and tapping machining center

T1170W (Mitsubishi M80B system + direct connection BT30-120 spindle + clamp arm type 21T servo tool magazine)Technical parameters

Technical Parameters

Model	model	Unit
Itinerary Travel
X-axis travel	X-axis travel	mm	1100
Y-axis travel	Y-axis travel	mm	700
Z-axis travel	Z-axis travel	mm	500
Distance from spindle end face to work table	Distance from guide plane to spindle center	mm	500-1000
The distance from the spindle centerline to the column guideway	Distance from spindle center to column rail	mm	827
The maximum diameter of rotation of the workpiece when the turntable is upright	Max workpiece rotation diameter	mm	Φ1210
Workpieces can be machined(Length X Width X Height) (Clamp included)	Machinable workpiece size (lengthWidthHeight)(Including fixtures) 90	mm	1100X500X140
Workbench Worktable
Five-axis table size	Worktable size	mm	Φ340
Maximum load-bearing	Maximum load	kg	100
T-slot	T-slot	mm	4-12-90°
Spindle Spindle
Spindle speed	Spindle Speed	.rpm	12000
Spindle power	Spindle motor power	KW	7.5
Spindle taper hole	Spindle taper hole		ER25
Loose knife way	Unlock tool way		Mechanical
Clamp armTool magazine
Tool magazine capacity	Tool magazine Capacity	T	21
Maximum tool length	Max tool length	mm	150
Maximum tool diameter/empty knife	Maximum tool diameter	mm	60/80
Maximum tool weight	Maximum tool weight	Kg	3
Tool change time	Tool change time	Sec	0.3~1.2
Federate
X/Y/Z express displacement	Ted X/Y/Z axis express displacement	mm/min	36000
Cutting feed rate	Cutting feed rate	mm/min	12000
Accuracy
Positioning accuracy	Pointing accuracy	mm	±0.003/300
Repeatable positioning accuracy	Repeat ability accuracy	mm	±0.002/300
Machine information
Machine tool dimensions	Machine dimension (L×W×H)	mm	330033003100
Machine weight	Machine weight	kg	7200
Power demand (power/current)	Power requirement	KVA	25

※As the company is constantly improving its products，Therefore, the company reserves the right to change the design and specifications and configuration at any time without notice，If patronized，Please check if the specifications have changed!

T1170W (Mitsubishi M80B system + direct connection BT30-120 spindle + clamp arm type 21T servo tool magazine)Model optional configuration (Additional charges apply）

sequencenumber	Accessory name	Product model	quantity	Remarks
1	̈Optional five-shaft (turboworm)	Body FAR210 motor + drive	1cover
2	̈Optional five-shaft (turboworm)	Body FHR255 motor + drive	1cover
3	̈Optional five-shaft (turboworm)	Body FHR320 motor + drive	1cover
4	̈ Optional five-shaft (harmonic gear)	Body JS210 motor + drive	1cover
5	̈ Optional five-shaft (harmonic gear)	Body JS255 motor + drive	1cover
6	̈ Optional four-axis (body)	Ontology AR210，Drive + motor	1cover
7	̈ Optional four-axis (body + disc tailstock)	Ontology AR210，Drive + motor，Disc tailstock RTA210，Block L，Bridge plate	1cover
8	̈ Optional four-axle (body + top tailstock)	Ontology AR210，Drive + motor，TJ210 top tailstock，Chuck flange	1cover
9	̈ Optional four-axis (body)	Ontology HR255，Drive + motor	1cover
10	̈ Optional four-axis (body + disc tailstock)	Ontology HR255，Drive + motor，Disc tailstock RTH255，Block L，Bridge plate	1cover
11	̈ Optional four-axle (body + top tailstock)	Ontology HR255，Drive + motor，TJ210 top tailstock，Chuck flange	1cover
12	̈ Flat nose pliers should be optional	6inch	1piece
13	̈ An optional refractometer is required	Handheld 0-60	1piece
14	̈ Optional lock knife wrench	ER25 locker wrench	1handful
15	̈ Optional locking tool holder	BT30 with card slot lock tool holder	1piece
16	̈Precision cutting head is optional	BT30-ER25-70mm (with card slot)	1piece
17	̈ Precision spring clip is optional	ER25 4/6/8/10/12	1 each
18	̈ To choose a U disk		1piece
19	̈ To choose a combination pressure plate	M12 combination platen	1cover
20	̈Chain chip conveyor should be optional		1cover