T260U 5-axis drilling and tapping machining center

T260U (new generation 220MA + direct coupled BT30 spindle + clamp arm type 21T tool magazine)Technical parametersTechnical Parameters

Model	model	unit
Itinerary Travel
X-axis travel	X-axis travel	mm	500
Y-axis travel	Y-axis travel	mm	460
Z-axis travel	Z-axis travel	mm	450
When the table is horizontal, the distance from the end face of the spindle to the disc surface		mm	40-490
The distance from the center of the spindle to the center of rotation of the A-axis		mm	Front 330，After 130
The maximum distance from the spindle axis to the table when the table is upright		mm	290 varus, 90 valgus
Max. workpiece diameter (mm)		mm	Φ380
Max. workpiece height (mm)		mm	290(Clamp included)
Five-axis turntable Worktable
Tabletop surface size	Worktable size	mm	Φ260
Maximum load-bearing	Maximum load	kg	50
T-slot	T-slot	mm	4-12-90°
The end face of the disc jumps		mm	0.005
The disc surface is runout		mm	0.005
Axis category			Tilt axis	Rotary shaft
Rated torque		Nm	253	105
Maximum torque		Nm	748	332
Current rating		A	17.5	8.5
Maximum current		A	63	30
Rated speed		Rpm	200	200
Maximum speed		Rpm	200	250
Rated voltage		V	220	220
Rated power		Kw	5.3	2.2
Maximum power		Kw	10.2	4.6
Brake clamping torque		Nm	≥610	≥235
Brake reset air pressure		MPa	0.5-0.55	0.5-0.55
encoder		Biss-C	26bit	26bit
Rotation angle		°	±110°	Any angle
Cooling method			Water	Natural cooling
Positioning accuracy		arcsec	±10	±10
Repeatable positioning accuracy		arcsec	±2	±2
Spindle Spindle
Spindle speed	Spindle Speed	.rpm	20000
Spindle power	Spindle motor power	KW	5.5
Spindle taper hole	Spindle taper hole		BT30
Spindle sleeve outer diameter	Outside diameter of spindle sleeve	mm	Φ100
Spindle spring chuck	Spindle collet chuck		ER25
Loose knife way	Unlock tool way		Mechanical knives
Tool magazine
Tool magazine capacity	Tool magazine Capacity	T	21
Maximum tool length	Max tool length	mm	150
Maximum tool diameter/empty knife	Maximum tool diameter	mm	60/80
Maximum tool weight	Maximum tool weight	Kg	3
Tool change time	Tool change time	Sec	0.3~1.2
Federate
X/Y/Z express displacement	Ted X/Y/Z axis express displacement	mm/min	48000
Cutting feed rate	Cutting feed rate	mm/min	12000
Accuracy
Positioning accuracy	Pointing accuracy	mm	±0.003/300
Repeatable positioning accuracy	Repeat ability accuracy	mm	±0.002/300
Machine information
Machine tool dimensions	Machine dimension (L×W×H)	mm	230023002650
Machine weight	Machine weight	kg	3300
Power demand (power/current)	Power requirement	KVA	15

※As the company is constantly improving its products，Therefore, the company reserves the right to change the design and specifications and configuration at any time without notice，If patronized，Please check if the specifications have changed!

T260U (new generation 220MA + direct coupled BT30 spindle + clamp arm type 21T tool magazine)Optional configuration of the model (additional cost)

serial number	Accessory name	Product model	quantity	Remarks
1	̈Contact tool setter should be selected	GZ66	1cover	Hainachuan
2	̈Contact tool setter should be selected	TM26D	1cover	Medron
3	̈Contact tool setter should be selected	TS27R	1cover	Renishaw
4	̈ Wireless probes should be selected	JW-80	1cover	Hainachuan
5	̈ Imported ceramic ruby stylus should be selected	A-5003-3709	1cover	Renishaw
6	̈ Calibration balls should be optional		1cover	Domestic
7	̈Marble rulers should be selected	250X250	1cover	Domestic
8	̈DD 5-axis is optional	RTMD260	1cover	Demothe
9	̈DD 5-axis is optional	JKDC300A1	1cover	Jianke
10	̈DD 5-axis is optional	JKDC300B1	1cover	Jianke
11	̈DD 5-axis is optional	DAF320	1cover	Ubit