W1165L-High Speed Horizontal Machining Center

W1165L (Mitsubishi M80B + direct BT40 spindle + arm type 24T tool magazine)Technical parametersTechnical Parameters

Model	model	Unit)
itineraryTravel
X-axis travel	X-axis travel	mm	1100
Y-axis travel	Y-axis travel	mm	700
Z-axis travel	Z-axis travel	mm	700
The distance from the end face of the spindle to the center of the table	Distance from guide plane to spindle center	mm	300-1000
The distance from the spindle centerline to the work surface	Distance from horizontal spindle centerline toworkbench surface	mm	20-720
workbenchWorktable
Table size	Worktable size	mm	500X500
T-slot	Maximum load	mm	5-18-100
Maximum load-bearing	Maximum load	kg	700
Minimum set angle	Minimum setting angle	Deg.	90°
Cumulative segmentation accuracy	Accumulated segmentation accuracy	Sec.	4″
Repeatability	Repeatability	Sec.	±1″
spindleSpindle
Spindle speed	Spindle Speed	.rpm	12000
Spindle power	Spindle motor power	KW	7.5Kw
Spindle taper hole	Spindle taper hole		BT40-φ140
Spindle spring chuck	Spindle collet chuck		C32
Loose knife way	Unlock tool way		Pneumatic booster cylinder knife
Knife arm type tool magazineTool magazine
Tool magazine capacity	Tool magazine Capacity	T	24
Feed rateFederate
X/Y/Z express displacement	Ted X/Y/Z axis express displacement	mm/min	36000
Cutting feed rate	Cutting feed rate	mm/min	12000
precisionAccuracy
Positioning accuracy	Pointing accuracy	mm	±0.005/300
Repeatable positioning accuracy	Repeat ability accuracy	mm	±0.003/300
Machine informationMachine information
Machine tool dimensions	Machine dimension (L×W×H)	mm	335032002700
Machine weight	Machine weight	kg	6500
Power demand (power/current)	Power requirement	KVA	25

※As the company is constantly improving its products，Therefore, the company reserves the right to change the design and specifications and configuration at any time without notice，

If patronized，Please check if the specifications have changed!

W1165L (Mitsubishi M80B + direct BT40 spindle + arm type 24T tool magazine)Model optional configuration (Additional charges apply）

sequencenumber	Accessory name	Product model	quantity	Remarks
1	̈Servo turntable should be selected	workbench:500X500，The minimum setting unit is 5°	1cover
2	̈Servo turntable should be selected	workbench:500X500，The minimum setting unit is 1°	1cover
3	̈Servo turntable should be selected	workbench:630X630，The minimum setting unit is 5°	1cover
4	̈Servo turntable should be selected	workbench:630X630，The minimum setting unit is 1°	1cover
5	̈ Flat nose pliers should be optional	6inch	1piece
6	̈ An optional refractometer is required	Handheld 0-60	1piece
7	̈ Optional lock knife wrench	Dedicated to C32	1handful
8	̈ Optional locking tool holder	BT40 with clamping lock tool holder	1piece
9	̈Precision cutting head is optional	BT40-C32-105(With card slot)	1piece
10	̈ Precision spring clip is optional	C32 3/4/6/8/10/12/16	1 each
11	̈ To choose a U disk		1piece
12	̈ To choose a combination pressure plate	M16 Composite Platen	1cover
13	̈Chain chip conveyor should be optional		1cover