T1170L(Planar machine)(Mitsubishi M80B system + direct BT30 spindle + clamp arm type 21T servo tool magazine)
Technical parametersTechnical Parameters
| Model |
model |
Unit |
|
| Itinerary Travel |
| X-axis travel |
X-axis travel |
mm |
1100 |
| Y-axis travel |
Y-axis travel |
mm |
700 |
| Z-axis travel |
Z-axis travel |
mm |
550 |
| Distance from spindle end face to work table |
Distance from guide plane to spindle center |
mm |
180-730 |
| The distance from the spindle centerline to the column guideway |
Distance from spindle center to column rail |
mm |
837 |
| Workbench Worktable |
| Table size |
Worktable size |
mm |
1200x650 |
| Maximum load-bearing |
Maximum load |
kg |
800 |
| T-slot |
T-slot |
mm |
5-18-125 |
| Spindle Spindle |
| Spindle speed |
Spindle Speed |
.rpm |
20000 |
| Spindle power |
Spindle motor power |
KW |
5.5 |
| Spindle taper hole |
Spindle taper hole |
|
ER25 |
| Loose knife way |
Unlock tool way |
|
Mechanical |
| Clamp armTool magazine |
| Tool magazine capacity |
Tool magazine Capacity |
T |
21 |
| Maximum tool length |
Max tool length |
mm |
150 |
| Maximum tool diameter/empty knife |
Maximum tool diameter |
mm |
60/80 |
| Maximum tool weight |
Maximum tool weight |
Kg |
3 |
| Tool change time |
Tool change time |
Sec |
0.3~1.2 |
| Federate |
| X/Y/Z express displacement |
Ted X/Y/Z axis express displacement |
mm/min |
36000 |
| Cutting feed rate |
Cutting feed rate |
mm/min |
12000 |
| Accuracy |
| Positioning accuracy |
Pointing accuracy |
mm |
±0.003/300 |
| Repeatable positioning accuracy |
Repeat ability accuracy |
mm |
±0.002/300 |
| Machine information |
| Machine tool dimensions |
Machine dimension (L×W×H) |
mm |
3300*3300*2900 |
| Machine weight
|
Machine weight |
kg |
6300 |
| Power demand (power/current) |
Power requirement |
KVA |
25 |
※As the company is constantly improving its products，Therefore, the company reserves the right to change the design and specifications and configuration at any time without notice，
If patronized，Please check if the specifications have changed!
T1170L(Side machine)(Mitsubishi M80B system + direct BT30 spindle + clamp arm type 21T servo tool magazine)
Technical parametersTechnical Parameters
| Model |
model |
Unit |
|
| Itinerary Travel |
| X-axis travel |
X-axis travel |
mm |
1100 |
| Y-axis travel |
Y-axis travel |
mm |
700 |
| Z-axis travel |
Z-axis travel |
mm |
550 |
| Distance from spindle end face to work table |
Distance from guide plane to spindle center |
mm |
480-1030 |
| The distance from the spindle centerline to the column guideway |
Distance from spindle center to column rail |
mm |
837 |
| Maximum workpiece rotation diameter |
Max workpiece rotation diameter |
mm |
Φ1210 |
| Workpieces can be machined(Length X Width X Height)
(Clamp included) |
Machinable workpiece size
(length*Width*Height)(Including fixtures)
90 |
mm |
1100X500X140 |
| Workbench Worktable |
| Table size |
Worktable size |
mm |
1200x500 |
| Four-axis disc size |
4-axis worktable size |
mm |
Φ340 |
| Maximum load bearing capacity of the table |
Worktable maximum load |
kg |
800 |
| Maximum load capacity of four axes |
4-axis worktable maximum load |
kg |
100 |
| Table T-slot |
Worktable T-slot |
mm |
3-18-100 |
| Four-axis T-slot |
4-axis T-slot |
mm |
4-14-90° |
| Spindle Spindle |
| Spindle speed |
Spindle Speed |
.rpm |
20000 |
| Spindle power |
Spindle motor power |
KW |
5.5 |
| Spindle taper hole |
Spindle taper hole |
|
ER25 |
| Loose knife way |
Unlock tool way |
|
Mechanical |
| Clamp armTool magazine |
| Tool magazine capacity |
Tool magazine Capacity |
T |
21 |
| Maximum tool length |
Max tool length |
mm |
150 |
| Maximum tool diameter/empty knife |
Maximum tool diameter |
mm |
60/80 |
| Maximum tool weight |
Maximum tool weight |
Kg |
3 |
| Tool change time |
Tool change time |
Sec |
0.3~1.2 |
| Federate |
| X/Y/Z express displacement |
Ted X/Y/Z axis express displacement |
mm/min |
36000 |
| Cutting feed rate |
Cutting feed rate |
mm/min |
12000 |
| Accuracy |
| Positioning accuracy |
Pointing accuracy |
mm |
±0.003/300 |
| Repeatable positioning accuracy |
Repeat ability accuracy |
mm |
±0.002/300 |
| Machine information |
| Machine tool dimensions |
Machine dimension (L×W×H) |
mm |
3300*3300*3200 |
| Machine weight
|
Machine weight |
kg |
6800 |
| Power demand (power/current) |
Power requirement |
KVA |
25 |
※As the company is constantly improving its products，Therefore, the company reserves the right to change the design and specifications and configuration at any time without notice，
If patronized，Please check if the specifications have changed!
T1170L(Planar machine)(Mitsubishi M80B system + direct BT30 spindle + clamp arm type 21T servo tool magazine)Model optional configuration (Additional charges apply）
| sequencenumber |
Accessory name |
Product model |
quantity |
Remarks |
| 1 |
̈Optional five-shaft (turboworm) |
Body FAR210 motor + drive |
1cover |
|
| 2 |
̈Optional five-shaft (turboworm) |
Body FHR255 motor + drive |
1cover |
|
| 3 |
̈Optional five-shaft (turboworm) |
Body FHR320 motor + drive |
1cover |
|
| 4 |
̈ Optional five-shaft (harmonic gear) |
Body JS210 motor + drive |
1cover |
|
| 5 |
̈ Optional five-shaft (harmonic gear) |
Body JS255 motor + drive |
1cover |
|
| 6 |
̈ Optional four-axis (body) |
Ontology AR210，Drive + motor |
1cover |
|
| 7 |
̈ Optional four-axis (body + disc tailstock) |
Ontology AR210，Drive + motor，Disc tailstock RTA210，Block L，Bridge plate |
1cover |
|
| 8 |
̈ Optional four-axle (body + top tailstock) |
Ontology AR210，Drive + motor，TJ210 top tailstock，Chuck flange |
1cover |
|
| 9 |
̈ Optional four-axis (body) |
Ontology HR255，Drive + motor |
1cover |
|
| 10 |
̈ Optional four-axis (body + disc tailstock) |
Ontology HR255，Drive + motor，Disc tailstock RTH255，Block L，Bridge plate |
1cover |
|
| 11 |
̈ Optional four-axle (body + top tailstock) |
Ontology HR255，Drive + motor，TJ210 top tailstock，Chuck flange |
1cover |
|
| 12 |
̈ Flat nose pliers should be optional |
6inch |
1piece |
|
| 13 |
̈ An optional refractometer is required |
Handheld 0-60 |
1piece |
|
| 14 |
̈ Optional lock knife wrench |
ER25 locker wrench |
1handful |
|
| 15 |
̈ Optional locking tool holder |
BT30 with card slot lock tool holder |
1piece |
|
| 16 |
̈Precision cutting head is optional |
BT30-ER25-70mm (with card slot) |
1piece |
|
| 17 |
̈ Precision spring clip is optional |
ER25 4/6/8/10/12 |
1 each |
|
| 18 |
̈ To choose a U disk |
|
1piece |
|
| 19 |
̈ To choose a combination pressure plate |
M12 combination platen |
1cover |
|
| 20 |
̈Chain chip conveyor should be optional |
|
1cover |
|
T1170L(Side machine)(Mitsubishi M80B system + direct BT30 spindle + clamp arm type 21T servo tool magazine)
Model optional configuration (Additional charges apply）
| sequencenumber |
Accessory name |
Product model |
quantity |
Remarks |
| 1 |
̈Optional five-shaft (turboworm) |
Body FAR210 motor + drive |
1cover |
|
| 2 |
̈Optional five-shaft (turboworm) |
Body FHR255 motor + drive |
1cover |
|
| 3 |
̈Optional five-shaft (turboworm) |
Body FHR320 motor + drive |
1cover |
|
| 4 |
̈ Optional five-shaft (harmonic gear) |
Body JS210 motor + drive |
1cover |
|
| 5 |
̈ Optional five-shaft (harmonic gear) |
Body JS255 motor + drive |
1cover |
|
| 6 |
̈ Optional four-axis (body) |
Ontology AR210，Drive + motor |
1cover |
|
| 7 |
̈ Optional four-axis (body + disc tailstock) |
Ontology AR210，Drive + motor，Disc tailstock RTA210，Block L，Bridge plate |
1cover |
|
| 8 |
̈ Optional four-axle (body + top tailstock) |
Ontology AR210，Drive + motor，TJ210 top tailstock，Chuck flange |
1cover |
|
| 9 |
̈ Optional four-axis (body) |
Ontology HR255，Drive + motor |
1cover |
|
| 10 |
̈ Optional four-axis (body + disc tailstock) |
Ontology HR255，Drive + motor，Disc tailstock RTH255，Block L，Bridge plate |
1cover |
|
| 11 |
̈ Optional four-axle (body + top tailstock) |
Ontology HR255，Drive + motor，TJ210 top tailstock，Chuck flange |
1cover |
|
| 12 |
̈ Flat nose pliers should be optional |
6inch |
1piece |
|
| 13 |
̈ An optional refractometer is required |
Handheld 0-60 |
1piece |
|
| 14 |
̈ Optional lock knife wrench |
ER25 locker wrench |
1handful |
|
| 15 |
̈ Optional locking tool holder |
BT30 with card slot lock tool holder |
1piece |
|
| 16 |
̈Precision cutting head is optional |
BT30-ER25-70mm (with card slot) |
1piece |
|
| 17 |
̈ Precision spring clip is optional |
ER25 4/6/8/10/12 |
1 each |
|
| 18 |
̈ To choose a U disk |
|
1piece |
|
| 19 |
̈ To choose a combination pressure plate |
M12 combination platen |
1cover |
|
| 20 |
̈Chain chip conveyor should be optional |
|
1cover |
|
Jutuo Intelligence
WeChat
Scan the QR Code with WeChat