CNC-886L high-speed vertical machining center

CNC-866L（Mitsubishi M80BSystem + Direct Coupled BT40 Spindle)Technical parameters

Technical Parameters

Model	model	Unit)
Itinerary Travel
X-axis travel	X-axis travel	mm	850
Y-axis travel	Y-axis travel	mm	600
Z-axis travel	Z-axis travel	mm	600
Distance from spindle end face to work table	Distance from guide plane to spindle center	mm	110-710
The distance from the spindle center to the column guide face		mm	643
Workbench Worktable
Table size	Worktable size (L×W)	mm	1000×600
Maximum load-bearing	Maximum load	kg	750
T-slot	T-slot	mm	5-18-100
Spindle Spindle
Spindle speed	Spindle Speed	.rpm	12000
Spindle power	Spindle motor power	KW	11
Spindle spring chuck	Spindle collet chuck		C32
Loose knife way	Unlock tool way		Hydraulic
Tool magazine (Clamp Arm Type)
Tool magazine capacity	Tool magazine Capacity	T	24
Federate
X/Y/Z express displacement	Ted X/Y/Z axis express displacement	mm/min	36000
Cutting feed rate	Cutting feed rate	mm/min	10000
Accuracy
Positioning accuracy	Pointing accuracy	mm	±0.003/300
Repeatable positioning accuracy	Repeat ability accuracy	mm	±0.002/300
Machine information
Machine tool dimensions	Machine dimension (L×W×H)	mm	2550×2750×2500
Machine weight	Machine weight	kg	5000
Power demand (power/current)	Power requirement	KVA	25

※As the company is constantly improving its products，Therefore, the company reserves the right to change the design and specifications and configuration at any time without notice，

If patronized，Please check if the specifications have changed!

CNC-866L（Mitsubishi M80BSystem + Direct Coupled BT40 Spindle)Optional configuration of the model (charged)

serial number	Accessory name	Product model	quantity	Remarks
1	̈Optional five-shaft (turboworm)	Body FAR210 motor + drive	1cover
2	̈ Optional five-shaft (harmonic gear)	Body J225 motor + drive	1cover
3	̈ Optional four-axis (body)	Ontology AR210，Drive + motor	1cover
4	̈ Optional four-axis (body + disc tailstock)	Ontology AR210，Drive + motor，Disc tailstock RTA210，Block L，Bridge plate	1cover
5	̈ Optional four-axle (body + top tailstock)	Ontology AR210，Drive + motor，TJ210 top tailstock，Chuck flange	1cover
6	̈ Flat nose pliers should be optional	6inch	1piece
7	̈ An optional refractometer is required	Handheld 0-60	1cover
8	̈Precision cutting head is optional	BT40-C32-105(With card slot)	1piece
9	̈ Optional locking tool holder	BT40 with clamping lock tool holder	1piece
10	̈ Optional lock knife wrench	Dedicated to C32	1piece
11	̈ Precision spring clip is optional	C32 3/4/6/8/10/12/16	1 each
12	̈ To choose a U disk		1piece
13	̈ To choose a combination pressure plate	M16 Composite Platen	1cover