VH1057L (Mitsubishi M80B + direct BT40 spindle + 24T tool magazine with arm type)Technical parameters
Technical Parameters
| Model |
model |
Unit) |
|
| itineraryTravel |
| X-axis travel |
X-axis travel |
mm |
1000 |
| Y-axis travel |
Y-axis travel |
mm |
500 |
| Z-axis travel |
Z-axis travel |
mm |
700 |
| Distance from spindle end face to work table |
Distance from guide plane to spindle center |
mm |
150-850 |
| The distance from the spindle centerline to the column guideway |
|
mm |
555 |
| workbenchWorktable |
| Table size |
Worktable size (L×W) |
mm |
1200×500 |
| Maximum load-bearing |
Maximum load |
kg |
600 |
| T-slot |
T-slot |
mm |
5-18-100 |
| spindleSpindle |
| Spindle speed |
Spindle Speed |
.rpm |
12000 |
| Spindle power |
Spindle motor power |
KW |
7.5 |
| Spindle taper hole |
Spindle taper hole |
|
BT40-φ140 |
| Spindle spring chuck |
Spindle collet chuck |
|
C32 |
| Loose knife way |
Unlock tool way |
|
Pneumatic booster cylinder knife |
| Knife arm type tool magazineTool magazine |
| Tool magazine capacity |
Tool magazine Capacity |
T |
24 |
| Feed rateFederate |
| X/Y/Z express displacement |
Ted X/Y/Z axis express displacement |
mm/min |
36000/48000/48000 |
| Cutting feed rate |
Cutting feed rate |
mm/min |
12000 |
| precisionAccuracy |
| Positioning accuracy |
Pointing accuracy |
mm |
±0.003/300 |
| Repeatable positioning accuracy |
Repeat ability accuracy |
mm |
±0.002/300 |
| Machine informationMachine information |
| Machine tool dimensions |
Machine dimension (L×W×H) |
mm |
2800*2700*2700 |
| Machine weight
|
Machine weight |
kg |
4800 |
| Power demand (power/current) |
Power requirement |
KVA |
18 |
※As the company is constantly improving its products，Therefore, the company reserves the right to change the design and specifications and configuration at any time without notice，
If patronized，Please check if the specifications have changed!
VH1057L (Mitsubishi M80B + direct BT40 spindle + 24T tool magazine with arm type)
Model optional configuration (Additional charges apply）
| sequencenumber |
Accessory name |
Product model |
quantity |
Remarks |
| 1 |
̈Optional five-shaft (turboworm) |
Body FAR210 motor + drive |
1cover |
|
| 2 |
̈Optional five-shaft (turboworm) |
Body FHR255 motor + drive |
1cover |
|
| 3 |
̈Optional five-shaft (turboworm) |
Body FHR320 motor + drive |
1cover |
|
| 4 |
̈ Optional five-shaft (harmonic gear) |
Body JS210 motor + drive |
1cover |
|
| 5 |
̈ Optional five-shaft (harmonic gear) |
Body JS255 motor + drive |
1cover |
|
| 6 |
̈ Optional four-axis (body) |
Ontology AR210，Drive + motor |
1cover |
|
| 7 |
̈ Optional four-axis (body + disc tailstock) |
Ontology AR210，Drive + motor，Disc tailstock RTA210，Block L，Bridge plate |
1cover |
|
| 8 |
̈ Optional four-axle (body + top tailstock) |
Ontology AR210，Drive + motor，TJ210 top tailstock，Chuck flange |
1cover |
|
| 9 |
̈ Optional four-axis (body) |
Ontology HR255，Drive + motor |
1cover |
|
| 10 |
̈ Optional four-axis (body + disc tailstock) |
Ontology HR255，Drive + motor，Disc tailstock RTH255，Block L，Bridge plate |
1cover |
|
| 11 |
̈ Optional four-axle (body + top tailstock) |
Ontology HR255，Drive + motor，TJ210 top tailstock，Chuck flange |
1cover |
|
| 12 |
̈ Flat nose pliers should be optional |
6inch |
1piece |
|
| 13 |
̈ An optional refractometer is required |
Handheld 0-60 |
1piece |
|
| 14 |
̈ Optional lock knife wrench |
Dedicated to C32 |
1handful |
|
| 15 |
̈ Optional locking tool holder |
BT40 with clamping lock tool holder |
1piece |
|
| 16 |
̈Precision cutting head is optional |
BT40-C32-105(With card slot) |
1piece |
|
| 17 |
̈ Precision spring clip is optional |
C32 3/4/6/8/10/12/16 |
1 each |
|
| 18 |
̈ To choose a U disk |
|
1piece |
|
| 19 |
̈ To choose a combination pressure plate |
M16 Composite Platen |
1cover |
|
| 20 |
̈Chain chip conveyor should be optional |
|
1cover |
|
Jutuo Intelligence
